PS-75
The blow moulding machine PS-75 used for producing toys, drums, jerry cans, kettles, water tanks, etc, is single station with accumulator die head, which is specially designed for 25L as maximum volume, suitable for HDPE/LDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity is higher than 70 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS-75 series.
BASIC DATE
| Materials: |
PE, PP, PVC, PS, PC, EVA, etc |
| Capacity: |
25L(MAX) |
| Output(dry cycle): |
360 PC/h |
| Total power: |
52KW |
| Average energy consumption: |
20KW |
EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 75mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: U. S. A. Amerson converter instrument + Hard gear surface decelerator;
Drive power: 41KW;
Plasticizing capacity: 90Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 20.2KW;
Zones of heating: 4 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 4;
ACCUMULATOR HEAD SYSTEM
Mode of general constructions: Accumulator head
| Mode of heating: |
Adopting ceramic heaters |
| Temperature controlling precision: |
Various in ± 1 |
| Heating power: |
15.2kw |
| Temperature control: |
Adopting Japan Omron automatic temperature control module |
| Temperature controlling precision: |
Various in ± 1% |
| Max annular diameter: |
250mm |
CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle
| Clamping force: |
176 KN |
| Platen opening stroke: |
250~700mm |
| Platen size: |
720× 600mm |
| Max mould size(W× H): |
440× 650mm |
| Mould thickness: |
250~350mm |
BLOWING SYSTEM
Bottom blowing system & expander are equipped;
HYDRAULIC SYSTEM
The whole hydraulic system adopts Taiwan HITECH components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;
ELECTRONIC CONTROLLING
Imported Italy GEFRAN computer control system(10.7' color screen + soft button + 300 points parison controller + temperature control module + PLC), other electronic parts, such as LG\OMRON, etc;
ENERGY EQUIPMENT
Compress air: Pressure: 0.8Mpa, currency: 0.6m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 120L/min;
ELECTRIC SOURCES
According to the voltage condition in your factory;
MACHINE DEMENSION (L× W× H): 4.1× 2.3× 3.6(m);
TOTAL WEIGHT:9.5T
SPECIFICATIONS
UNITS
PS-75
Max container capacity:25L
Number of die heads:1Set
Machine dimension (L*W*H):4.1*2.3*3.6M
Total weight:9.5Ton
Clamping force:176KN
Platen opening stroke:250-700mm
Platen size:720*600mm
Max mould size (W*H):440*650mm
Mould thickness:250-350mm
Max drive:41KW
Total power:52KW
Fan power for screw: 0.18*4 KW
Air pressure : 0.8Mpa
Air consumption:0.6M
3/min
Average energy consumption:20KW
Screw diameter:75mm
Screw L/D ratio:24L/D
Plasticizing capacity: 90Kg/hour
Number of heating zone: 4 Zone
Extruder heating power:20.2KW
Extruder driving power:30KW
Die head dimension:1.9*0.65*0.52M
Number of heating zone:4 Zone
Power of die heating:15.2KW
Max die pin diameter:250mm
Accumulator volume:5L
){kind=link}
){kind=link}