The blow moulding machine PS-80 is used for producing toys, drums, jerry cans, kettles, water tanks, etc, is single station with accumulator die head, which is specially designed for 30L as maximum volume, suitable for HDPE/LDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity is higher than 250 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS-80 series.
TECHNICAL DATA
BASIC DATE
| Materials: |
PE, PP, PVC, PS, PC, EVA, etc |
| Capacity: |
30L(MAX) |
| Output(dry cycle): |
250 PC/h |
| Total power: |
52KW |
| Average energy consumption: |
22KW |
EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 80mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 41KW;
Plasticizing capacity: 100Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 20.2KW;
Zones of heating: 4 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 4;
ACCUMULATOR HEAD SYSTEM
Mode of general constructions: Accumulator head;
Mode of heating: Adopting ceramic heaters;
Temperature controlling precision: Various in ± 1;
Heating power: 15.2kw;
Temperature control: Adopting Japan Omron automatic temperature control module;
Temperature controlling precision: Various in ± 1%;
Max annular diameter: 250mm;
CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle;
Clamping force: 200 KN;
Platen opening stroke: 400~900mm;
Platen size: 880× 900mm;
Max mould size(W× H): 600× 1000mm;
Mould thickness: 450~510mm;
BLOWING SYSTEM
Bottom blowing system & expander are equipped;
HYDRAULIC SYSTEM
The whole hydraulic system adopts Japanese YUKEN components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;
ELECTRONIC CONTROLLING
U. S. A. AMERSON PLC + Taiwan HITECH LCD monitor + MITSUBISHI Automatic temperature control model + other electronic parts, such as LG\OMORON, etc;
ENERGY EQUIPMENT
Compress air: Pressure: 1.0Mpa, currency: 1.2m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 120L/min;
ELECTRIC SOURCES
According to the voltage condition in your factory;
MACHINE DEMENSION
(L× W× H): 4.7× 2.6× 4.0(m);
TOTAL WEIGHT
12T
Guarantee : 1 year.
Installation:
We can send technician to install the machine or customer can send technician to our factory for training.
Buyer need to pay air thicket & food & hotels.
Remark:
(a) All specifications and designs are subject to change without notice.
(b) The price of the machine all are in US dollars based on FOB China Port.
(c) The price is base on 380V, 50Hz, 3 Phase, for special power, add additional 5% of all machine.
SPECIFICATIONS
UNITS
PS-80
Max container capacity:30L
Number of die heads:1 Set
Machine dimension (L*W*H):4.7*2.6*4.0M
Total weight:12Ton
CLAMPING UNIT
Clamping force:200KN
Platen opening stroke:400-900mm
Platen size:880*900mm
Max mould size (W*H):600*1000mm
Mould thickness:450-510mm
POWER
Max drive:41KW
Total power:52KW
Fan power for screw:0.18*4KW
Air pressure:1.0 Mpa
Air consumption:0.8M3/min
Average energy consumption:22KW
EXTRDER UNIT
Screw diameter:80mm
Screw L/D ratio:24L/D
Plasticizing capacity:100Kg/hour
Number of heating zone:4 Zone
Extruder heating power:20.2 KW
Extruder driving power:30 KW
ACCUMULATOR HEAD
Die head dimension:1.9*0.65*0.52 M
Number of heating zone:4 Zone
Power of die heating:15.2 KW
Max die pin diameter:250 mm
Accumulator volume:5L
){kind=link}
){kind=link}