The blow moulding machine PS-70 is used for producing toys, bottles, jerry cans, kettles, milk tanks, etc, is double station with single die head, which is specially designed for 5L as maximum volume, suitable for HDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity of 5L * 2 is higher than 250 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS70D series.
TECHNICAL DATA
BASIC DATE
| Materials: |
PE\PP\PVC\PS\PC\EVA, etc |
| Capacity: |
5L(MAX)*2 |
| Output(dry cycle): |
800X2 PC/h |
| Total power: |
41KW |
| Average energy consumption: |
22KW |
EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 70mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 33KW;
Plasticizing capacity: 80Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 14.2KW;
Zones of heating: 3 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 3;
DIE HEAD SYSTEM
Central-incoming extruding die head;
According to the different plastic product, there is one series of die head for choice, such as double die (center distance: 160mm), Tetra-die (center distance: 85mm);
Mode of heating: Adopting heaters made of stainless steel;
Temperature controlling precision: Various in ± 1
Heating power: 5.7KW;
Temperature control: Automatic temperature control model such as Japan Mitsubishi Temperature controlling precision: Various in ± 1%;
Max annular diameter: 135mm;
CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle;
Clamping force: 68KN (max);
Platen opening stroke: 150~500mm;
Platen size: 320× 370mm;
Max mould size(W× H): 350× 370mm/238× 600mm;
Mould thickness: 153~300mm;
CUTTING DEVOICE
High speed electrical heating cutter is equipped;
HYDRAULIC SYSTEM
The whole hydraulic system adopts Japanese YUKEN components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;
ELECTRONIC CONTROLLING
U. S. A. AMERSON PLC + Taiwan HITECH LCD monitor + MITSUBISHI Automatic temperature control model + other electronic parts, such as LG\OMORON, etc;
ENERGY EQUIPMENT
Compress air: Pressure: 0.7Mpa, currency: 0.9m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 60L/min;
ELECTRIC SOURCES according to the voltage condition in your factory;
MACHINE DEMENSION (L× W× H): 3.3× 2.3× 2.6(m);
TOTAL WEIGHT 5.5T
SPECIFICATIONS
| UNITS |
PS-70 |
| Max container capacity: |
5L*2 |
| Number of die heads: |
1 SET |
| Machine dimension (L*W*H): |
3.3*2.3*2.6M |
| Total weight: |
5.5 Ton |
| CLAMPING UNIT |
Clamping force: |
68KN |
| Platen opening stroke: |
150-500mm |
| Platen size: |
320*370mm |
| Max mould size (W*H): |
350*370/238*600mm |
| Mould thickness: |
153-300mm |
| POWER |
Max drive: |
33KW |
| Total power: |
41 KW |
| Fan power for screw: |
0.14*3 KW |
| Air pressure: |
0.7Mpa |
| Air consumption: |
0.9 M3/min |
| Average energy consumption: |
23 KW |
| EXTRDER UNIT |
Screw diameter: |
70mm |
| Screw L/D ratio: |
24 L/D |
| Plasticizing capacity: |
80 Kg/hour |
| Number of heating zone: |
3 Zone |
| Extruder heating power: |
14.2 KW |
| Extruder driving power: |
22 KW |
| DIE HEAD |
Number of heating zone: |
3 Zone |
| Power of die heating: |
5.7 KW |
| Max die pin diameter: |
135 mm |
| Center distance of double die: |
160 mm |
| Center distance of tetra-die: |
85 mm |
){kind=link}
){kind=link}