PS-60 Extrusion Blow Moulding Machine
The blow moulding machine PS-50 used for producing toys, bottles, jerry cans, kettles, milk tanks, etc, is single station with single die head, which is specially designed for 2L as maximum volume, suitable for HDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity of 2L is higher than 150 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS-50 series.
TECHNICAL DATA
BASIC DATE
Materials: PE, PP, PVC, PS, PC, EVA, etc;
Capacity: 2L(MAX);
Output(dry cycle): PC/h 1500;
Total power: 22KW;
Average energy consumption: 12KW;
EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 50mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 11KW;
Plasticizing capacity: 30Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 10.8KW;
Zones of heating: 3 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 3;
DIE HEAD SYSTEM
Central-incoming extruding die head;
According to the different plastic product, there is one series of die head for choice, such as double die (center distance: 130mm), Tetra-die (center distance: 75mm);
Mode of heating: Adopting heaters made of stainless steel;
Temperature controlling precision: Various in ± 1
Heating power: 4.2kw;
Temperature control: Automatic temperature control model such as Japan Mitsubishi Temperature controlling precision: Various in ± 1%;
Max annular diameter: 75mm;
CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle;
Clamping force: 38KN (max);
Platen opening stroke: 130~370mm;
Platen size: 280× 370mm;
Max mould size(W× H): 350× 370mm/205× 600mm;
Mould thickness: 135~210mm;
CUTTING DEVOICE
High speed electrical heating cutter is equipped;
HYDRAULIC SYSTEM
The whole hydraulic system adopts Japanese YUKEN components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;
ELECTRONIC CONTROLLING
U. S. A. AMERSON PLC + Taiwan HITECH LCD monitor + MITSUBISHI Automatic temperature control model + other electronic parts, such as LG\OMORON, etc;
ENERGY EQUIPMENT
Compress air: Pressure: 0.6Mpa, currency: 0.4m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 35L/min;
ELECTRIC SOURCES
According to the voltage condition in your factory;
MACHINE DEMENSION
(L× W× H): 2.8× 1.7× 2.5(m);
TOTAL WEIGHT
3.2T
SPECIFICATIONS
UNITS
PS-60
Max container capacity
L
2
Number of die heads
Set
1
Machine dimension (L*W*H)
M
2.8*1.7*2.5
Total weight
Ton
3.2
CLAMPING UNIT
Clamping force
KN
38
Platen opening stroke
mm
130-370
Platen size
mm
280*370
Max mould size (W*H)
mm
350*370/205*600
Mould thickness
mm
135-210
POWER
Max drive
KW
16.5
Total power
KW
22
Fan power for screw
KW
0.25
Air pressure
Mpa
0.6
Air consumption
M3/min
0.4
Average energy consumption
KW
12
EXTRDER UNIT
Screw diameter
mm
50
Screw L/D ratio
L/D
24
Plasticizing capacity
Kg/hour
30
Number of heating zone
Zone
3
Extruder heating power
KW
10.8
Extruder driving power
KW
11
DIE HEAD
Number of heating zone
Zone
2
Power of die heating
KW
4.2
Max die pin diameter
mm
75
Center distance of double die
mm
130
Center distance of tetra-die
mm
75