PS-70
The blow moulding machine PS-75 used for producing toys, drums, jerry cans, kettles, water tanks, etc, is single station with accumulator die head, which is specially designed for 25L as maximum volume, suitable for HDPE/LDPE, PE, PP, PVC, PETG and other materials for blow moulding. The productivity is higher than 70 PCS per hour.
Modiffied hydraulic system & reliable mechanical actions are the main traits of PS-75 series
BASIC DATE
Materials: PE, PP, PVC, PS, PC, EVA, etc;
Capacity: 25L(MAX);
Output(dry cycle): PC/h 360;
Total power: 52KW;
Average energy consumption: 20KW;
EXTRUSION UNIT
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 75mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: U. S. A. Amerson converter instrument + Hard gear surface decelerator;
Drive power: 41KW;
Plasticizing capacity: 90Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 20.2KW;
Zones of heating: 4 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 4;
ACCUMULATOR HEAD SYSTEM
Mode of general constructions: Accumulator head;
Mode of heating: Adopting ceramic heaters;
Temperature controlling precision: Various in ± 1;
Heating power: 15.2kw;
Temperature control: Adopting Japan Omron automatic temperature control module;
Temperature controlling precision: Various in ± 1%;
Max annular diameter: 250mm;
CLAMPING UNIT
Single station with high-precision guide and large arm cylinder axle;
Clamping force: 176 KN;
Platen opening stroke: 250~700mm;
Platen size: 720× 600mm;
Max mould size(W× H): 440× 650mm;
Mould thickness: 250~350mm;
BLOWING SYSTEM
Bottom blowing system & expander are equipped;
HYDRAULIC SYSTEM
The whole hydraulic system adopts Taiwan HITECH components and proportional controlling circle;
Import hydraulic valve, seal and proportional control;
ELECTRONIC CONTROLLING
Imported Italy GEFRAN computer control system(10.7' color screen + soft button + 300 points parison controller + temperature control module + PLC), other electronic parts, such as LG\OMRON, etc;
ENERGY EQUIPMENT
Compress air: Pressure: 0.8Mpa, currency: 0.6m3/min;
Cold water required: Pressure: 0.2~0.3Mpa, currency: 120L/min;
ELECTRIC SOURCES
According to the voltage condition in your factory;
MACHINE DEMENSION
(L× W× H): 4.1× 2.3× 3.6(m);
TOTAL WEIGHT
9.5T
SPECIFICATIONS |
UNITS |
PS-70 |
Max container capacity |
L |
25 |
Number of die heads |
Set |
1 |
Machine dimension (L*W*H) |
M |
4.1*2.3*3.6 |
Total weight |
Ton |
9.5 |
CLAMPING UNIT |
Clamping force |
KN |
176 |
Platen opening stroke |
mm |
250-700 |
Platen size |
mm |
720*600 |
Max mould size (W*H) |
mm |
440*650 |
Mould thickness |
mm |
250-350 |
POWER |
Max drive |
KW |
41 |
Total power |
KW |
52 |
Fan power for screw |
KW |
0.18*4 |
Air pressure |
Mpa |
0.8 |
Air consumption |
M3/min |
0.6 |
Average energy consumption |
KW |
20 |
EXTRDER UNIT |
Screw diameter |
mm |
75 |
Screw L/D ratio |
L/D |
24 |
Plasticizing capacity |
Kg/hour |
90 |
Number of heating zone |
Zone |
4 |
Extruder heating power |
KW |
20.2 |
Extruder driving power |
KW |
30 |
ACCUMULATOR HEAD |
Die head dimension |
M |
1.9*0.65*0.52 |
Number of heating zone |
Zone |
4 |
Power of die heating |
KW |
15.2 |
Max die pin diameter |
mm |
250 |
Accumulator volume |
L |
5 |