PET BLOW MOLDING MACHINE--PS-1000
Productivity:1000pcs per hour (based on 500ml bottle)
MACHINE PARTS LIST
I. AIR SYSTEM: COUNTRY OF ORIGION
1.OPERATION CYLINDER:F E S T O (GERMAN)
2.PNEUMATICS SOLENOID VALVE:F E S T O (GERMAN)
3. HIGH PRESSURE SOLENOID VALVE:PARKER (SWITZERLAND)
4. HIGH PRESSURE REGULATOR (TAIWAN)
5.HIGH PRESSURE FLOW CONTROL VALVE:PARKER (SWITZERLAND)
6.HIGH PRESSURE TANK (50liter*40kg/cm2 )
7.OPERATION PIPE (kg/cm2 ) (CHINA)
8.HIGH PRESSURE PIPE (40 kg/cm2) (CHINA)
9.HIGH PRESSURE EXHAUST SILENCE (CHINA)
10.HIGH PRESSURE SAFETY VALVE (TAIWAN)
11.SEPARATE BLOWING SYSTEM (CHINA)
II. ELECTRIC SYSTEM:
1.CONTROL PANEL (TAIWAN)
2.PROGRAMMABLE CONTROLERS:MITSUBISHI FX2N (JAPAN)
3.DIGIT MOLDULUS OUPUT CONTROLLER (JAPAN)
4.HEATER OUTPUT S.C.R. CONTROLER (TAIWAN)
5.INPUT/OUTPUT SIGNAL DISPLAY (CHINA)
6.EXHAUST FAN (CHINA)
7.INVERTER (TAIWAN)
8.PLC OUTPUT SIGNAL INLARGE MOLDULUS (TAIWAN)
9.SPEED CONTROLLER (CHINA)
10.CONTROL RELAY (JAPAN)
11.PREFORM PHOTO SENSOR (JAPAN)
12.HEATER FOCUS REFLACTOR (TAIWAN)
III. SAFETY DEVICE:
1.EMERGENCY STOP BOTTOM (STOP)
2.MOLD POSITION SENSORS
3.BOTTLE DISCHARGE SENSOR
4.OVEN SENSOR
5.MOSTLY CYLINDER WITH POSITION SENSOR
6.AUTO STOP WITHOUT PREFORM
Item1 Full Automatic PET blow molding machine PS-1000W
Including Feeding System (Preform Tank, Conveyor, Un-scrambler)
(1) MOLDING SYSTEM:
| Clamping force: |
11000kn |
| Clamping stroke: |
110mm |
| Stretching stroke: |
410mm |
| Bottom stroke: |
60mm |
| Cavity pitch: |
114.3mm |
| Number of cavities: |
1 |
(2) CONTAINER:
| Max container volume: |
1.5 liters |
| Neck diameter range: |
100mm |
| Max container dia: |
95mm |
| Max container height: |
320mm |
(3) ELECTRICAL SYSTEM:
| Total power: |
17.5KW |
| Heating power: |
6KW |
| Max heating power: |
17.5KW |
(4) AIR SYSTEM:
| Operation pressure: |
7kg/cm2 |
| Air consuming: |
1000L/min |
| Blowing pressure: |
32kg/cm2 |
| Air consuming: |
1400L/min |
(5) CHILLED WATER:
| Operation pressure: |
2-4kg/cm2 |
| Temperature: |
10-12ºC |
| Consuming: |
5400kcal/hr |
| Flow rate: |
30L/min |
(6) COOLING WATER:
| Operation pressure: |
5-6kg/cm2 |
| Temperature: |
25ºC |
| Consuming: |
12000kcal/hr |
| Flow rate: |
40L/min |
(7) PRODUCTIVITY:
Theoretical output 1,200 bottles per hour (Bottle 500ml)
Actual outputs depend on the bottle shape and preform quality.
(8) MACHINE
Machine size: 1,830 x 1,100 x 2,172 mm (L x W x H)
Machine weight: 1,200 kg
Specifications are subject to change without notice.
Item2. Bottle blow mold (1 Cavity) Aluminum 7075 Alloy
0.5L 2Sets
1L 1Set
Full Auto-matic PET blow molding machine PS-1000W
| No. |
Description |
Specifications |
| 1 |
MOLDING SYSTEM |
Clamping force |
11000kn |
| Clamping stroke |
110mm |
| Stretching stroke |
410mm |
| Bottom stroke |
60mm |
| Cavity pitch |
114.3mm |
| Number of cavities |
1 |
| 2 |
CONTAINER |
Max container volume |
1.5 liters |
| Neck diameter range |
100mm |
| Max container dia |
95mm |
| Max container height: |
320mm |
| 3 |
ELECTRICAL
SYSTEM |
Total power |
17.5KW |
| Heating power |
6KW |
| Max heating power: |
17.5KW |
| 4 |
AIR
SYSTEM |
Operation pressure |
7kg/cm2 |
| Air consuming |
1000L/min |
| Blowing pressure |
32kg/cm2 |
| Air consuming |
1400L/min |
| 5 |
CHILLED
WATER |
Operation pressure |
2-4kg/cm2 |
| Temperature |
10-12ºC |
| Consuming |
5400kcal/hr |
| Flow rate |
30L/min |
| 6 |
COOLING
WATER |
Operation pressure |
5-6kg/cm2 |
| Temperature |
25ºC |
| Consuming |
12000kcal/hr |
| Flow rate |
40L/min |
| 7 |
PRODUCTIVITY |
Theoretical output 600 bottles per hour (Bottle 500ml) |
| Actual outputs depend on the bottle shape and preform quality. |
| 8 |
Machine |
Machine size |
1,830 x 1,100 x 2,172mm |
| Machine weight |
1,200 kg |
| Specifications are subject to change without notice. |
| 9 |
Mould |
Bottle blow mold (1 Cavity) |
Aluminum 7075 Alloy |
| 0.5L |
1Set |
Configuration
| No. |
AIR SYSTEM |
COUNTRY OF ORIGION |
| 1 |
OPERATION CYLINDER |
F E S T O (GERMAN) |
| 2 |
PNEUMATICS SOLENOID VALVE |
F E S T O(GERMAN) |
| 3 |
HIGH PRESSURE SOLENOID VALVE |
PARKER(SWITZERLAND) |
| 4 |
HIGH PRESSURE REGULATOR |
(TAIWAN) |
| 5 |
HIGH PRESSURE FLOW CONTROL VALVE |
PARKER (SWITZERLAND) |
| 6 |
HIGH PRESSURE TANK |
(50liter*40kg/cm2 ) |
| 7 |
OPERATION PIPE (kg/cm2 ) |
(CHINA) |
| 8 |
HIGH PRESSURE PIPE (40 kg/cm2) |
(CHINA) |
| 9 |
HIGH PRESSURE EXHAUST SILENCE |
(CHINA) |
| 10 |
HIGH PRESSURE SAFETY VALVE |
(TAIWAN) |
| 11 |
SEPARATE BLOWING SYSTEM |
(CHINA) |
| No. |
ELECTRIC SYSTEM |
COUNTRY OF ORIGION |
| 1 |
CONTROL PANEL |
(TAIWAN) |
| 2 |
PROGRAMMABLE CONTROLERS:MITSUBISHI FX2N |
(JAPAN) |
| 3 |
DIGIT MOLDULUS OUPUT CONTROLLER |
(JAPAN) |
| 4 |
HEATER OUTPUT S.C.R. CONTROLER |
(TAIWAN) |
| 5 |
INPUT/OUTPUT SIGNAL DISPLAY |
(CHINA) |
| 6 |
EXHAUST FAN |
(CHINA) |
| 7 |
INVERTER |
(TAIWAN) |
| 8 |
PLC OUTPUT SIGNAL INLARGE MOLDULUS |
(TAIWAN) |
| 9 |
SPEED CONTROLLER |
(CHINA) |
| 10 |
CONTROL RELAY |
(JAPAN) |
| 11 |
PREFORM PHOTO SENSOR |
(JAPAN) |
| 12 |
HEATER FOCUS REFLACTOR |
(TAIWAN) |
| No. |
SAFETY DEVICE |
COUNTRY OF ORIGION |
| 1 |
EMERGENCY STOP BOTTOM (STOP) |
√ |
| 2 |
MOLD POSITION SENSORS |
√ |
| 3 |
BOTTLE DISCHARGE SENSOR |
√ |
| 4 |
OVEN SENSOR |
√ |
| 5 |
MOSTLY CYLINDER WITH POSITION SENSOR |
√ |
| 6 |
AUTO STOP WITHOUT PREFORM |
√ |
Free Standard spare parts list
| NO. |
Description |
Specification |
Q'ty |
Remarks |
| 1 |
Tool Box |
Middle size |
1 set |
/ |
| 2 |
Adjustable Wrench |
12" |
1 set |
/ |
| 3 |
Combination Wrench |
7mm-19mm |
1 set |
/ |
| 4 |
Screw Driver |
Philip |
1 set |
/ |
| 5 |
Screw Driver |
Cross |
1 set |
/ |
| 6 |
Internal Pliers |
/ |
1 set |
/ |
| 7 |
External Pliers |
/ |
1 set |
/ |
| 8 |
Hexagon Key Wrench |
2.5mm-10mm |
1 set |
/ |
| 9 |
Heater Fuse |
3A |
5 pcs |
/ |
| 10 |
Proximity Sensor |
PM12-04N |
1 pcs |
/ |
| 11 |
Proximity Sensor |
SN04-N |
1 pcs |
/ |
| 12 |
Electrical Cylinder Switch |
SME-8-ZS-KL-LED-24 |
1 pcs |
/ |
| 13 |
O-ring (Bush cover) |
G55 |
20 pcs |
/ |
| 14 |
O-ring (Mandrel) |
21*2 |
20 pcs |
/ |
| 15 |
Snap Ring C Type C |
HC65 |
4 pcs |
/ |
| 16 |
Infrared Lamp |
2500W/980L |
3 pcs |
/ |
| 17 |
Infrared Lamp |
3500W/980L |
3 pcs |
/ |
| 18 |
Bush |
/ |
5 pcs |
/ |
| 19 |
Cooling ramp |
SDC-4P055A |
1 pcs |
/ |
| 20 |
Distance block |
SD-3P475E |
5pcs |
/ |
| 21 |
Bearing block |
SD-3P472F |
5pcs |
/ |
| 22 |
Bearing Ball Cover of Linear Bearing |
/ |
1pcs |
/ |
Guarantee : 1 year.
Installation:
We can send technician to install the machine or customer can send technician to our factory for training.
Buyer need to pay air thicket & food & hotels.
Remark:
(a) All specifications and designs are subject to change without notice.
(b) The price of the machine all are in US dollars based on FOB China Port.
(c) The price is base on 380V, 50Hz, 3 Phase, for special power, add additional 5% of all machine.
){kind=link}
){kind=link}